L.T Busduct (Air Insulated / Sandwich Types)
Busduct Is Mostly Used In Industrial Location To Seamlessly Distribute Power From One End Of The Building To Another. These Ducts Are Manufactured Using Copper Or Aluminium To Protect It Against Mechanical Damage. The Duct Is Also Dust And Vermin Resistant. The Key Advantage Of Busduct Is Its Flexibility And Adaptability To A Wide Range Of Requirements, Which Allows Us To Design Them According To Industry Specific Requirements.
- Busduct Systems Fulfil Four Different Applications: Single Loads, Multiple Loads, Riser, And Service Entrance.
- Highly Flexible And Versatile
- Superior Electrical Design: Low Impedance, Higher Short-Circuit System And Lower Electromagnetic Generation
- Light Weight For Quicker And Easier Installation
- Saves Time And Labour Cost
- Improved Safety
- Low-Cost Maintenance
| Reference standard | IEC : 61439-1, IS : 8623 |
|---|---|
| Operational System | 415VAC 3 phase, 3 or 4 wire, 50 Hz |
| Operational current | up to 6300A |
| Short time rating | up to 70KA/sec. |
| Type | Totally Enclosed, Air Insulated & sandwich Type |
| Degree of protection | Up to IP-54 (indoor)/IP-65 (outdoor) |
| Max. Temp. Rise | 40°C over ambient temp 45°C |
| Busbar | EC grade Copper or Aluminium |
| Busbar | EC grade Copper or Aluminium |
| Earthing | separate earth bus provided on enclosure |
| Phase cross over | Optional if required |
- Industries
- Residential Complexes
- Hotels
- Hospitals