Automatic Power Factor Correction Panel
Automatic Power Factor Correction Panels Are Used To Maintain The Power Factor In The Desired Range. APFC Panels, Designed Using Advanced Technology Are Capable Of Saving Maximum Power And Energy. These Panels Can Effectively And Automatically Manage Quickly Changing And Scattered Loads Along With The Retention Of High Power Factor. These Panels Eliminates The Need For Constant Manual Interventions, Along With Maintaining High Power Factor, Cutting Down Electrical Expenditure.
- Improves Efficiency Of The System
- Corrosion Resistant
- Electrical Insulation
- Reduces KVA Demand Charge
- Reduces Power Loss
- Low Maintenance Cost
- High Efficiency
- Protects Electrical Equipments
- Prevents Leading Power Factor In The Installation During Low Load Conditions
| Reference standard | IEC : 61439-1, IS : 8623 |
|---|---|
| Operational system | 415V AC 3 phase, 3 or 4 wire, 50Hz |
| Operational current | up to 4000A |
| Short time rating | up to 50KA/sec. |
| Degree of protection | up to IP-52 |
| Max. Temp. Rise | 40°C over ambient temp 45°C |
| Form of separation | up to 3B |
| Busbar | EC grade copper or aluminium. |
| Capacitor Operating Voltage | 415-525 VAC |
| Switching | Conventional/Thyristor based |
| PF Controller | Up to 16 stage single controller |
| De-tune Filter | 7% upon demand |
| Operational height | 300-1800 mm |
| Max.Height of panel | 2275 mm |
| Cable Alley width | 300 mm |
| Depth of panel | up to 1200 mm |
| Cooling | Natural/Forced |
- Windmills
- Monitoring Current Harmonics
- Process Controllers
- Micro Processors
- LT & HT Factories
- Electrical Installations
- Line Voltage Analysis